This is the setup I use to convert VHS tapes to H.264 video files.
1 The camera turns on in Smart Capture mode. (If it's in a different mode, press the Mode button, then until the LCD displays Smart Capture mode, then press OK.) 2 Compose the picture. 3 Press the Shutter button halfway to focus and set exposure. When the framing marks turn green, press the Shutter button completely down. Using the framing marks. Codex On-board S Codex On-board S Plus SxS Pro Cards Codex Data Packs 8 Gb 16Gb Codex Capture Drives 'Red ring' 32Gb 64Gb Codex Desktop Transfer Station Codex Capture Drive Transfer Station M SxS Pro+ Cards Codex Capture Drive Dock (Usb-3 edit) 64Gb 128Gb Codex Transfer Drive 1tb Codex XR Capture Drives 'Yellow ring' 512Gb.
I'm using a Panasonic DMR-EZ48V DVD Recorder + VHS VCR to play back my VHS tapes. For this exercise I obviously don't need the DVD drive but this was the only device available to me and it works pretty well.
Codex's award-winning products for the media and entertainment industries include production solutions as well as high-performance recording and workflow tools in support of the leading camera vendors for feature, television, and commercial production. Codex also provide personalized service in the rapidly evolving production landscape. Onboard M Desktop Transfer Station CODEX CDX-5500. 1 x ATTO Card (For MAC) 1 x USB Cable. From Sony Broadcast products to used disc drives the site has it all. New Codex Capture Drive Transfer Station M For Mac. UMD Audio (codec ATRAC3plus™, PCM, (MPEG4 AVC)), UMD Video (codec MPEG4 AVC, ATRAC3plus™, Caption PNG).
To capture video from the VCR and save it to my computer I'm using a USB device called EasyCAP, they are a pretty popular device. I purchased this online for approximately $30. There are lots of clones of this device.
You will also need an RCA audio/video cable, sometimes referred to as AV jacks. I already had one of these cables laying around the house.
As a heads up I only use the video jack (the yellow one) from the RCA cable to plug into the VCR and into the EasyCAP device. In my experience the audio didn't seem to work with EasyCAP. As an effective work around I used a separate audio RCA Y adapter cable with 3.5mm jack. Another cable that I already had laying around the house.
I connect the white and red jacks into the VCR and the 3.5mm jack into my computer's line-in jack (it'll be blue coloured). If you're using a laptop you probably won't have a line-in jack but the microphone jack should work fine.
That should be all the hardware requirements.
The software on my computer that I'm using is called VLC media player. This program is free and open source plus it works on MS Windows, GNU/Linux, Mac OS X, FreeBSD and Android etc. It's brilliant, you're probably already using it. I should also point out that my OS is Xubuntu (GNU/Linux). I did have issues trying to save to PAL format using Linux Mint.
VLC instructions
Step 1 – Open Capture Device Xem phim tuyet son phi ho 1999 tap cuoi. Hp 41c owners manual.
Step 2 – Select video and audio devices
Step 3 – Convert captured video to raw format. You can convert to a different format as you are capturing but from my experience I wasn't able to view what I was capturing unless I was capturing as raw. You'll produce some pretty massive files capturing in raw format e.g. 30min = 35GB. You do have lots of options available if you decide to play around with the profile which is greyed out on the following screen because I selected Dump raw input. Select the Start button to continue.
Step 4 – Record video and save to file. Your video should now be playing on the screen, if not you may have to press play on your VCR and/or VCR remote. You can now watch the video without recording it. To start recording press the red record button, a file will be automatically created in the background. The recording process will take as long as it takes to watch through the video i.e. if you want to record a one hour video it will take one hour to record it. Press the stop recording button to stop recording, this will also stop your video play back.
1 The camera turns on in Smart Capture mode. (If it's in a different mode, press the Mode button, then until the LCD displays Smart Capture mode, then press OK.) 2 Compose the picture. 3 Press the Shutter button halfway to focus and set exposure. When the framing marks turn green, press the Shutter button completely down. Using the framing marks. Codex On-board S Codex On-board S Plus SxS Pro Cards Codex Data Packs 8 Gb 16Gb Codex Capture Drives 'Red ring' 32Gb 64Gb Codex Desktop Transfer Station Codex Capture Drive Transfer Station M SxS Pro+ Cards Codex Capture Drive Dock (Usb-3 edit) 64Gb 128Gb Codex Transfer Drive 1tb Codex XR Capture Drives 'Yellow ring' 512Gb.
I'm using a Panasonic DMR-EZ48V DVD Recorder + VHS VCR to play back my VHS tapes. For this exercise I obviously don't need the DVD drive but this was the only device available to me and it works pretty well.
Codex's award-winning products for the media and entertainment industries include production solutions as well as high-performance recording and workflow tools in support of the leading camera vendors for feature, television, and commercial production. Codex also provide personalized service in the rapidly evolving production landscape. Onboard M Desktop Transfer Station CODEX CDX-5500. 1 x ATTO Card (For MAC) 1 x USB Cable. From Sony Broadcast products to used disc drives the site has it all. New Codex Capture Drive Transfer Station M For Mac. UMD Audio (codec ATRAC3plus™, PCM, (MPEG4 AVC)), UMD Video (codec MPEG4 AVC, ATRAC3plus™, Caption PNG).
To capture video from the VCR and save it to my computer I'm using a USB device called EasyCAP, they are a pretty popular device. I purchased this online for approximately $30. There are lots of clones of this device.
You will also need an RCA audio/video cable, sometimes referred to as AV jacks. I already had one of these cables laying around the house.
As a heads up I only use the video jack (the yellow one) from the RCA cable to plug into the VCR and into the EasyCAP device. In my experience the audio didn't seem to work with EasyCAP. As an effective work around I used a separate audio RCA Y adapter cable with 3.5mm jack. Another cable that I already had laying around the house.
I connect the white and red jacks into the VCR and the 3.5mm jack into my computer's line-in jack (it'll be blue coloured). If you're using a laptop you probably won't have a line-in jack but the microphone jack should work fine.
That should be all the hardware requirements.
The software on my computer that I'm using is called VLC media player. This program is free and open source plus it works on MS Windows, GNU/Linux, Mac OS X, FreeBSD and Android etc. It's brilliant, you're probably already using it. I should also point out that my OS is Xubuntu (GNU/Linux). I did have issues trying to save to PAL format using Linux Mint.
VLC instructions
Step 1 – Open Capture Device Xem phim tuyet son phi ho 1999 tap cuoi. Hp 41c owners manual.
Step 2 – Select video and audio devices
Step 3 – Convert captured video to raw format. You can convert to a different format as you are capturing but from my experience I wasn't able to view what I was capturing unless I was capturing as raw. You'll produce some pretty massive files capturing in raw format e.g. 30min = 35GB. You do have lots of options available if you decide to play around with the profile which is greyed out on the following screen because I selected Dump raw input. Select the Start button to continue.
Step 4 – Record video and save to file. Your video should now be playing on the screen, if not you may have to press play on your VCR and/or VCR remote. You can now watch the video without recording it. To start recording press the red record button, a file will be automatically created in the background. The recording process will take as long as it takes to watch through the video i.e. if you want to record a one hour video it will take one hour to record it. Press the stop recording button to stop recording, this will also stop your video play back.
An avi file will be created and the file name will contain the current date and time, the following is an example.
vlc-record-2014-09-20-11h04m46s-Streaming-.avi
Codex Capture Drive Transfer Station M For Mac Os
It should be obvious but remember the quality of your created digital video file will only be as good as the quality of your VHS video tape.
Codex Capture Drive Transfer Station M For Mac Download
The following is a list of resources I used when setting this up for myself.
Codex Capture Drive Transfer Station M For Macs
To convert your raw format video into H.264, I use the OpenShot video editor. You can easily import the avi file, edit it, although depending on the file size (if it's large) your computer will probably chug a fair bit then export to the format you require. You can also choose some nice open video formats such as ogg or webm to export to.
